Zhengzhou Great Electric Co.,Ltd.
Grow with our partner n the wordwide
Add to Cart
Single Phase Energy Meter Withstand Voltage Test Bench
Feature & Function
1. With special programmable power meter pressure instruments, using DDS source, PWM digital amplifier,
10 bit A/D conversion, voltage ramp slow down function
2. With safety and protection facilities, interlock with high voltage output, also with warning lamp
3. Can do the test between “voltage/current to enclosure” and “voltage/current to auxiliary terminal”;
also can do withstand voltage test between voltage and current
4. Separately set leakage current tester on every meter position; with independent withstand voltage cut,
leakage current test and alarm for breakdown. The breakdown on any one meter position will not get
influence on normal test of other positions.
5. When breakdown, audible and visible indication will come.
6. Can finish all various test at a time by switching the test function switch
7. With RS232 interface and can communication with computer
Technical Index
Technical parameters for Withstand Voltage Tester
| Output high voltage | |
| Range | AC 0-5000V, accuracy ≤±2% |
| Distortion | ≤2% |
| Output frequency | 50HZ/60HZ |
| Leakage current: 0-120mA | |
| Test time | |
| Automatic way | 1-99S |
| Manual way | no time limited |
| Output high voltage capacity: 500VA | |
| Insulation resistance: ≥5MΩ | |
| Working temperature: 0-45℃, R.H ＜85% | |
| Power Supply: 220V±10% | |
| Dimension: 420*200*450mm | |
Technical Parameter for test bench
