The clamp-on core design permits non-contact current measurements through magnetic field induction without requiring that the primary conductor be taken offline and disconnected for current measurement. Featuring high accuracy and low phase sift, the iProbe is especially well suited for Class A meter current measurement and harmonic analysis.

Specifications:

• Frequency: 45 Hz to 60Hz

• Maximum Operating Voltage: 600VAC

• Dielectric Withstand Voltage: 3,536 VRMS

• Dielectric Resistance: 1,000 MΩ @ 500 VDC

• Secondary Burden Resistance: ≥ 100K Ohm

• Operating Temperature: -15ºC to +50ºC.

• Relative Humidity: 80%, non-condensing

• Output Cable: 3.00m (9.8FT) PVC insulated reinforced coaxial cable.

• Cable Termination Options: BNC connector Ø 4mm RED/ BLACK banana plugs

• CAT II (MC005 and MC100)

• CAT III (MC200) • RoHS Compliant.

Iprobe Clamp-on Current Transformer Models

Part Number	Rated (Amp)	Max (Amp)	Output	ID (mm)	Accuracy	Phase shift	Working voltage
MC 005	5A	50A	100mV/A	Ø15	±0.3% (45-60HZ)	±2°(45 to 5kHZ)	CAT II600V
MC 001	100A	120A	100mV/A	Ø15	±0.3%(45-60HZ)	±2°(45 to 5kHZ)	CAT II600V
MC 200	20A	30A	10mV/A	Ø24	±0.3%(45-60HZ)	±2°(45 to 5kHZ)	CAT II600V
MC 200	200A	260A	1mV/A	Ø24	±0.3%(45-60HZ)	±2°(45 to 5kHZ)	CAT II600V

60HZ AC Current Clamp Probe

Power Test Equipment

Portable Meter Test Equipment

CT PT Test Equipment

Meter Test Bench

Protection Relay Test Equipment

Transformer Test Equipment

Partial Discharge Test Equipment

Insulation Resistance Test Set

High Voltage Testing Equipment

Substation Test Equipment

AC Current Clamp Probe

Split Core Current Transformer

60HZ AC Current Clamp Probe

ac dc clamp ammeter

ac dc current clamp meter

dc current probe oscilloscope